Edge e-series reset and firmware upgrade

Edge e-series reset

Download the latest Edge e-series software (zip file)

Unpack the yakfw.sysa-dl to your Local C:\ drive

Change your management station to IP 192.168.111.2
(tämä ei ole välttämätön, toimii myös DHCP:lla)

Unplug power of the Edge
Hold down and keep Reset pressed
Plug power in
Wait until ATTN stays on

Open a Browser and check through HTTP://192.168.111.1 that it says running from backup firmware.

Open command prompt and change directory to C:\

type in ftp 192.168.111.1
log in with username admin and password admin

type in: bin
type in: hash
type in: put yakfw.sysa-dl

The edge should reboot automatically when completed.

Checkthrough Browser HTTPS://192.168.111.1 that it is back up and then reconfigure it,
select blank configuration if prompted.